IC Realtime Specialty: 4-CH H.264E CUBE REAL-TIME DVR with BUILT-IN 5.6 LCD - Manual (Page 56)

56
Figure 5-1
5.3 Setting
In main menu, highlight setting icon and double click mouse. System setting
interface is shown as below. See Figure 5-2.
Figure 5-2
5.3.1 General
General setting includes the following items. See Figure 5-3.
z
System time: here is for you to set system time
z Date format: there are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-
YYYY.
z Date separator: there are three denotations to separate date: dot, beeline and
solidus.
z Snapshoot: Here you can set image upload interval. (This function applies to
some series only).
z DST: Here you can set DST time and date. Please enable DST function and then
click set button. You can see an interface is shown as in Figure 5-4. Here you can
set start time and end time by setting corresponding week setup. In Figure 5-4,
enable date button, you can see an interface is shown as in Figure 5-5. Here you
can set start time and end time by setting corresponding date setup.
z Time format: there are two types: 24-hour mode or 12-hour mode.