6 alarm, 7 detect, 8 pan/tilt/zoom – IC Realtime Specialty: 4-CH H.264E CUBE REAL-TIME DVR with BUILT-IN 5.6 LCD User Manual
Page 68: Alarm, Detect, Pan/tilt/zoom
 
68
Figure 5-22
z
File length: upload file length. When setup is larger than the actual file length,
system will upload the whole file. When setup here is smaller than the actual file 
length, system only uploads the set length and auto ignore the left section. 
z
When interval value is 0, system uploads all corresponding files.
z
Period 1 and period 2: you can set two periods for one each channel.
System file name is shown as in Figure 5-23.
Figure
5-23
 
5.3.6 Alarm 
Please refer to chapter 4.6 Alarm Setup and Activation. 
5.3.7 Detect 
Please refer to chapter 4.5 Detect. 
5.3.8 Pan/Tilt/Zoom 
The pan/tilt/zoom setup includes the following items. Please select channel first. See 
Figure 5-24. 
z
Protocol: select corresponding PTZ protocol such as PELCOD.
z
Address: input corresponding PTZ address.
z
Baud rate: select baud rate.
z
Data bit: select data bit.
z
Stop bit: select stop bit.
z
Parity: there are three choices: none/odd/even.
After all the setups please click save button, system goes back to the previous menu. 
For detailed setup, please refer to chapter 4.9 Preset/Patrol/Pattern/Scan.