2 ptz, 1 direction key and 3d positioning key, 2 speed – IC Realtime Specialty: 4-CH H.264E CUBE REAL-TIME DVR with BUILT-IN 5.6 LCD User Manual
Page 89: 3 zoom/focus/iris
 
89
Figure 7-9
 
7.2.2 PTZ 
Before PTZ operation, please make sure you have properly set PTZ protocol. 
(Please refer to chapter 7.3.2 Setting-> Pan/Tilt/Zoom). 
Click PTZ button, the interface is shown as in Figure 7-10 . 
Figure 7-10
7.2.2.1 Direction key and 3D positioning key 
In Figure 7-10, there are eight direction keys. 
In the middle of the eight direction keys, there is a 3D intelligent positioning key. 
Click SIT button, system goes back to the single screen mode. Drag the mouse in 
the screen to adjust section size. It can realize PTZ automatically. 
7.2.2.2 Speed 
System supports eight-level speed. You can select from the dropdown list. Speed 2 
is faster than speed 1. 
7.2.2.3 Zoom/Focus/Iris 
Here is a sheet for you reference. 
You can click this icon to
display or hide the PTZ
control platform.