IC Realtime 4 Channel Forensic Network Video Recorder User Manual
Page 67
58
view current IP information. Besides, when PPPoE is operating, you can not modify
IP/Subnet mask /Gateway.
z
TCP port: Default value is 37777. You can change if necessary.
z
UDP port: Default value is 37778. You can change if necessary.
z
HTTP port: Default value is 80.
z
RTSP port: Default value is 554. For the main stream, the RTSP query format is
rtsp://username:password@ip:port/cam/realmonitor?channel=1&subtype=0. For the extra
stream, the RTSP query format is
rtsp://username:password@ip:port/cam/realmonitor?channel=1&subtype=1. Here you need
to input user name, password, device IP and port (default setup is 554. you do not need to
input here if it is the default value.). For standard RTSP protocol, when the encode mode is
MJPEG, the max resolution is 2040*2040.
z
Max connection: system support maximal 20 users. 0 means there is no connection limit.
z
Preferred DNS server: DNS server IP address.
z
Alternate DNS server: DNS server alternate address.
z
Transfer mode: Here you can select the priority between fluency/video qualities.
z
LAN download: System can process the downloaded data first if you enable this function.
The download speed is 1.5X or 2.0X of the normal speed.
After completing all the setups please click save button, system goes back to the previous menu.
Figure 4-63
4.2.5.5.1 Network Setting
Network setting interface is shown as in Figure 4-64. Please check the box to enable
corresponding function and then double click current item to go to setup interface.