IC Realtime 4 Channel Forensic Network Video Recorder User Manual
Page 81
72
Figure 4-86
Click Pan/Tilt/Zoom, the interface is shown as in Figure 4-87.
Please click icon and to adjust zoom, focus and Iris.
Figure 4-87
Please refer to chapter 4.1.7 for detailed information.
4.2.5.9 Display
Display setup interface is shown as below. See Figure 4-88.
z
Transparency: Here is for you to adjust transparency. The value ranges from 128 to 255.
z
Channel name: Click the Modify button here to change channel name. See Figure 4-89. You
can also set PIP channel name. Select remote front the dropdown list you can change
channel remote name. See Figure 4-90.
z
Time display: You can select to display time or not when system is playback.
z
Channel display: You can select to channel name or not when system is playback.
z
Screen calibration: Click it to calibrate screen.
z
Resolution: There are four options: 1920Ч1080, 1280Ч1024(default),1280Ч720,1024Ч768.
Please note the system needs to reboot to activate current setup.
z
Image enhance: Check the box; you can optimize the margin of the preview video.
z
Enable tour: Check the box here to enable tour function.
z
Interval: Set tour interval here.
z
Tour setup: Here you can activate tour function. System supports 1/4-window.
z
Motion tour type/alarm tour type: You can select motion tour type/alarm tout type from the
dropdown list.