IC Realtime 4 Channel Forensic Network Video Recorder - Manual (Page 95)

86
z Import: Here you can import the configuration files from the peripheral device to current
device. You need to select a folder first. You can see a dialogue box asking you to select a
folder if you are selecting a file. System pops up a dialogue box if there is no configuration
file under current folder. After successfully import, system needs to reboot to activate new
setup.
z Format: Click Format button, system pops up a dialogue box for you to confirm current
operation. System begins format process after you click the OK button.
Note:
z
System can not open config backup interface again if there is backup operation in the
process.
z System refreshes device when you go to the config backup every time and set current
directory as the root directory of the peripheral device.
z If you go to the configuration backup interface first and then insert the peripheral device,
please click Refresh button to see the newly added device.
Figure 4-115
4.2.8 Backup
NVR support USB device backup and network download. Here we introduce USB backup.
You can refer to Chapter 5 Web Operation for network download backup operation.
4.2.8.1 Detect Device
Click backup button, you can see an interface is shown as in Figure 4-116. Here is for you to
view devices information.
You can view backup device name and its total space and free space. The device includes
USB burner, flash disk, SD card, and portable HDD.
You can check the box here to select a backup device. Select a device and then click Erase
button you can delete files.