IC Realtime 1/2/4 Channel H.264 Network Video Server - Manual (Page 67)

61
Figure 5-50
Please refer to the following sheet for detailed information.
Parameter Function
Event
Type  The abnormal events include: no disk, no space, disk error, net error.
 You need to draw a circle to enable this function.
Latch The alarm output can delay for the specified time after alarm stops.
Then system disables alarm and corresponding activation output.
The default value is 10s.
Send
email If you enable this function, system can send out email to alarm the
specified user.
Alarm
upload System can upload the alarm signal to the network (includes the alarm
centre.)
Show
message System can display alarm information in local NVS screen.
5.3.4 Additional Function
5.3.4.1 Auto Register
Auto register interface is shown as below. See Figure 5-51.