IC Realtime 1/2/4 Channel H.264 Network Video Server - Manual (Page 71)

65
Wireless
signal CDMA_1X
signal You can view current 3G network signal.
 After the device connected to the EVDO module,you can view
CDMA_1x network signal.
 After the device connected to the W-CDMA or TD module,you can
view the EDGE network signal.
EVDO
signal You can view current 3G network signal.
 After the device connected to the EVDO module,you can view
EVDO signal.
 After the device connected to the W-CDMA module,you can view
W_CDMA network signal here.
 After the device connected to TD module,you can view TD-SCDMA
network signal here.
Save Click this button to save current setup.
Refresh Click this button to get device latest configuration.
5.3.4.4 Mobile Configuration
Mobile configuration interface is shown as in Figure 5-55.
Figure 5-55 Mobile Configuration
Please refer to the following sheet for detail information.
Parameter Function
Send event
message Device can send the event message (alarm information, motion detection
and etc) to the mobile user. You can check the box to enable the function.
Receiver You can input one or more mobile number(s) here to receive the
message.
SMS activate The mobile user can send out message to activate the device to connect
to the 3G network.
You need to check the box to enable current function.
Sender You can input several senders’ mobile number here.