IC Realtime 1/2/4 Channel H.264 Network Video Server - Manual (Page 73)

67
Auto connect: System auto connects to the previous hotspot after device reboot or
disconnection resulting from the environment factors.
Connect: Select a hotspot from the list and then connect.
Disconnect: After successfully connected to one hotspot, the connect button becomes
disconnect button for you to disconnect. (Note: When the Auto connect function is enabled,
device will connect again automatically within a short time. Please disable Auto connect
function and click Save button first and then click the Disconnect button to terminate
connection. )
IP address: It is the IP address after the device successfully connected to the wireless router.
Double click one hotspot; you can see an interface is shown as below.