IC Realtime 1/3" CCD D1 Weatherproof IR Network Camera with POE (ICIPB580) - Manual (Page 10)

10
RESET Support hardware reset. System needs to reboot to activate the default setup.
Port ESD
protection
9-pin input and output port
Network port
12V power adapter
9-pin I/O Port
One analog video output port
One audio input port
One audio output port
Two alarm input port
One alarm output port
One network interface（RJ45 10M/100M self-adaptive Ethernet port）
Others
One red/green running status indication light.
One RESET conversion cable
IR light (For IR series product only)
Installation Pendant installation
1.3.3 Factory Default Setup
Please refer to the following sheet for factory default setup information.
Function Configuration
Type
Item Name Default setup
General Setup Date format Y-M-D
DST Disable by default
Date separator „ _ ‟
Time format 24H
Language Simplified Chinese
When HDD is full Overwrite
Record duration 60M
Device No. 8
Video type PAL
Encode
Setup Main
Stream Channel Channel01
Encode mode H.264
Audio/Video enable Enable audio and video
General bit stream General bit stream
Resolution D1
Frame rate 25
Bit stream control VBR
Quality Good
Bit stream value 2048
I frame interval control 50
Extra
Stream Extension Stream General bit stream
Audio/Video enable Enable audio and video
Resolution CIF
Frame rate 25
Bit stream control VBR
Quality Good
Bit stream value 512
I frame interval control 50
Image Color Brightness:50
Contrast:50
Sautratioon:50