IC Realtime 1/3" CCD D1 Weatherproof IR Network Camera with POE (ICIPB580) - Manual (Page 6)

6
1 General Introduction
1.1 Overview
This series IP camera integrates the traditional camera and network video technology. It adopts
audio and video data collection, transmission together. It can connect to the network directly
without any auxiliary device.
This series IPC uses standard H.264 video compression technology and G.711a audio
compression technology, which maximally guarantee the audio and video quality.
This series IPC supports real-time monitor and listening at the same time. It supports analog
video output and dual-way bidirectional talk. It supports the IR night vision function. In the night
environments, the device can use the IR light to highlight the object which is suitable for the
surveillance function in the low illumination environments. The built-in protection enclosure has
the sound waterproof function suitable for use in the outdoor environments.
It can be used alone or used in a network area. When it is used lonely, you can connect it to the
network and then use a network client-end. Due to its multiple functions and various uses, this
series IPC is widely used in many environments such office, bank, road monitor and etc.
1.2 Features
User
Management
 Different user rights for each group, one user belongs to one group.
 The user right shall not exceed the group right.
Data
Transmission
 Wire data transmission via the Ethernet port.
Storage
Function
 Support central server backup function in accordance with your
configuration and setup in alarm or schedule setting
 Support record via Web and the recorded file are storage in the client-
end PC.
 Support local Micro SD card hot swap, support short-time storage when
encounter disconnection. Please note the SD card can storage the
image only.
Alarm
Function
 Real-time respond to external local alarm input, wireless alarm input and
video detect( within 200MS) as user pre-defined activation setup and
exert corresponding message in screen and audio prompt(allow user to
pre-record audio file)
 Real-time video detect: motion detect, camera masking, video loss.
Network
Monitor
 IPC supports one-channel audio/video data transmit to network terminal
and then decode. Delay is within 500ms (network bandwidth support
needed)
 Max supports 10 connections.
 Adopt the following audio and video transmission protocol: HTTP, TCP,
UDP, MULTICAST and etc.
 Support web access, widely used in WAN.
Network
Management
 Realize IPC configuration and management via Ethernet.
 Support device management via web or client-end.
Peripheral
Equipment
 Support peripheral equipment management, each peripheral equipment
control protocol and interface can be set freely.
 Support serial port (RS232/RS485) transparent data transmission.