IC Realtime 1/3" CCD D1 Weatherproof IR Network Camera with POE (ICIPB580) - Manual (Page 22)

22
After Micro SD card installation, put the connection board, CCD board module to the device. Put
the screw holes of the connection board to the four holes of the chassis, insert the screw and
then fix firmly to secure the connection board.
Step 6
Turn the front cover clockwise to put it back to the device and secure firmly. Then line up the
screw hole of the protection cap to the screw hole of the device chassis. Insert the inner hex
screw to the holes and fix firmly to fasten the front cap in the device.