IC Realtime 1/3" CCD D1 Weatherproof IR Network Camera with POE (ICIPB580) - Manual (Page 9)

9
IP address filter
IP address auto search function
Record
Schedule Record
Support max 6 periods. (This series product does not support this
function.)
Manual Record
After enabling manual record, no matter system is in schedule or
alarm status or not, system just begins recording.
Alarm Record
System automatically enables recording function when alarm
occurred.
Motion Detection Record
When video changes, system automatically enables record
operation.
OSD
Time Title Display
There are 255 layers.
O is the bottom layer and 255 is the highest layer.
O means completely transparent and 255 is opaque.
Channel Title Display Please refer to the above information.
Privacy Mask Max supports 8 zones.
Storage
Local Micro SD storage Support high-speed card/low-speed card
Based on SDK network
storage
Supported
Alarm
Network alarm/local
alarm output
1-ch local/network alarm output
Local alarm/network
alarm input
2-ch local/network alarm input
Event
Management
Activate alarm via motion
detection or external
input
Please enable pre-record function when activating the alarm
Upload image email. Upload automatically
Send out alarm notice via
email, HTTP and external
port.
Support de-jitter when alarm occurs frequently.
Support video short time
buffer storage before or
after alarm
Pre-record is 2Mbytes. Buffer storage video of 5s.
Control RS485 PTZ control Support semi-duplex communication way.
On-line
Upgrade
Network remote upgrade Use upgrade tool.
Device
Management
Network client-end
Log in the client-end software in the PC to monitor IPC.
Parameter
Configuration
IPC provides device information, video information, COM setup, record setup, motion detection
setup, alarm setup, OSD information interfaces to modify system setup.
IPC provides running information such as user port, log, status, user management, email setup,
date modification.
Log
System can record the important event log record
Record the following information：
System operation, setup operation, alarm event, record management, user management, clear
log.
Water Mark To avoid vicious video modification.
Power
supply
DC12V power supply