Interlogix MCR205-1T/1S User Manual - Manual (Page 12)

6 IFS MCR205-1T/1S User Manual
MCR205-1T/1S Installation
The MCR205-1T/1S is capable of transmitting data up to 20km with high
reliability and flexibility, depending on the SFP module being used. The SFP
transceivers are hot-swappable and can be plugged in or out when the media
converter is powered on.
To install MCR205-1T/1S with 100Base-SFP, simply complete the following
steps:
Step 1: Turn off the power of the device/station in a network to which the
MCR205-1T/1S will be attached.
Step 2: Ensure that there is no activity in the network.
Step 3: Install the SFP transceiver module. Make sure that same SFP modules
are used on both ends of the fiber cable.