Interlogix MCR205-1T/1S User Manual - Manual (Page 47)

IFS MCR205-1T/1S User Manual 41
Figure 38: Local TS-1000 OAM Setup Web Page screen
The Local TS-1000 OAM Setup Web page includes the following configurable
data:
TS-1000 OAM State Disable or enable the TS-1000 OAM operation mode. Default mode is
Disable.
TS-1000 Mode Provides two TS-1000 modes for operation, the available options are:
Terminal
Center
Default mode is Terminal.
Link Transparent Disable or enable the Link Transparent function. Default mode is
Disable.
Link Transparent
Result Displays the link transparent result.
Apply Button Press this button to save current configuration of MCR205-1T/1S.
Remote TS-1000 OAM Setup
The Remote TS-1000 OAM Setup is an advanced remote device monitor feature
that allows you to remote monitor and automatic notify status indication.