Interlogix MCR205-1T/1S User Manual User Manual
Page 14
Advertising
8
IFS MCR205-1T/1S User Manual
Step 3: Attach a rack-mount bracket to each side of the MCR-R15 chassis with
supplied screws included in the package.
Step 4: After the brackets are attached to the chassis, use matching screws to
securely attach the brackets to the rack, as shown below.
Step 5: Proceed with steps 4 and 5 of the previous section to connect the
network cabling.
WARNING:
You must use the screws supplied with the mounting brackets.
Damage caused to the parts by using incorrect screws would invalidate your
warranty.
Advertising