Interlogix MCR205-1T/1S User Manual - Manual (Page 16)

10 IFS MCR205-1T/1S User Manual
Figure 3: Web Management over Ethernet
Logging into the MCR205-1T/1S
The following shows how to startup the Web Management of the MCR205-1T/1S.
Please note that the device needs to be configured through an Ethernet
connection, make sure the administrator PC is setup on the same IP subnet
address.
For example, the default IP address of the MCR205-1T/1S is 192.168.0.100 (the
factory-default IP address), then the administrator PC should be set at
192.168.0.x (where x is a number between 1 and 254, except 100), and the
default subnet mask is 255.255.255.0.
Enter the default IP address of http://192.168.0.100 to the address bar of the web
browser.
After entering the username and password (default user name and password is
“admin”) in login screen, then the Web main screen will appear.
Default IP Address: 192.168.0.100
Default Account: admin
Default Password: admin