Interlogix MCR205-1T/1S User Manual - Manual (Page 58)

52 IFS MCR205-1T/1S User Manual
Specifications
Ethernet
Data Rate 10/100Base-TX port
Throughput (packet per
second) 148810pps@64Bytes
Switch Architecture Store-and-Forward
Flow Control Half-Full-Duplex mode (IEEE 802.3x)
Connector RJ-45 with Auto-MDI/MDI-X
Cable Type and Distance 10Base-T (Cat 3, 4, 5e) or 100Base-T (Cat 5e) – 328ft (100m)
Fiber
Data Rate 100 Base-FX
Connector SFP (MiniGIBIC) port
Fiber Type Varies by SFP module
LED Indicators
Power Status On - Green - power detected (+5VDC)
10/100Base-T Link Green/On – link established
Green/blinking – active port (TX/RX)
100Base-FX Link Green/On – 100Mbps half/full duplex mode operation
Green/Off – 10Mbps half/full duplex mode operation
SFP (Mini-GIBIC) port link Green/On – link established
Green/blinking – active port (TX/RX)
Reset Button Reset to factory default settings
Electrical and Mechanical
Input Power 5VDC @ 2A (3.3 watts)
Enclosure Metal
Dimensions (H x W x D)
3.82 x 2.76 x 1.02 in. (9.7 x 7.0 x 2.6 cm)
Weight 0.41 lbs. / 190g
Environmental
Operating Temperature 0ºC~50ºC
Storage Temperature -20ºC~70ºC
Relative Humidity 0%–90% (non-condensing)
Contacting Technical Support
Contact technical support if you encounter any difficulties during this installation.
Please make sure you have the requested diagnostic or log files ready before
you contact us by phone or go to
www.interlogix.com/customer-support .