Interlogix MCR205-1T/1S User Manual - Manual (Page 27)

IFS MCR205-1T/1S User Manual 21
The SNMP Management Web page includes the following configurable data:
SNMP Agent Disable or enable the SNMP Agent function, the default mode is
“Disable”.
SNMP Read
Community Input the characters for SNMP Read Community, up to maximum 16
characters.
SNMP Write
Community Input the characters for SNMP Write Community, up to maximum 16
characters.
System Name Input the characters for System Name, up to maximum 16 characters.
System Location Input the characters for System Location, up to a maximum 16
characters.
Contact Input the characters for a Contact person, up to a maximum 16
characters.
Apply Button Press the “Apply” button to save the latest configuration.
Note: The MCR205-1T/1S supports SNMP v1 / v2c protocols.
Figure 17: SNMP Trap Receiver Configuration Web page screen