Interlogix NS3502-8P-2S User Manual - Manual (Page 199)

IFS NS3502-8P-2S User Manual
199
Figure 4-9-11: DSCP Translation page screenshot
The page includes the following fields:
Object Description
• DSCP Maximum number of supported DSCP values is 64 and valid DSCP
value ranges from 0 to 63.
• Ingress Ingress side DSCP can be first translated to new DSCP before
using the DSCP for QoS class and DPL map.
There are two configuration parameters for DSCP Translation -
Translate
Classify
• Translate DSCP at Ingress side can be translated to any of (0-63) DSCP
values.
• Classify Click to enable Classification at Ingress side.
• Egress There are following configurable parameters for Egress side -
Remap DP0
Remap DP1
There is following configurable parameter for Egress side -
Remap
• Remap DP0 Select the DSCP value from select menu to which you want to
remap. DSCP value ranges from 0 to 63.
• Remap DP1 Select the DSCP value from select menu to which you want to
remap. DSCP value ranges from 0 to 63.
• Remap Select the DSCP value from select menu to which you want to
remap. DSCP value ranges from 0 to 63.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.