Interlogix NS3502-8P-2S User Manual - Manual (Page 476)

IFS NS3502-8P-2S User Manual
476
LLDPMED policy add
[voice|voice_signaling|guest_voice|guest_voice_signaling|softphone_voice|video_conferencin
g|streaming_video|video_signaling] [tagged|untagged] [<vlan_id>] [<l2_priority>] [<dscp>]
Parameters:
voice : Voice for use by dedicated IP Telephony handsets and other
similar appliances supporting interactive voice services. These devices are
typically deployed on a separate VLAN for ease of deployment and
enhanced security by isolation from data applications
voice_signaling : Voice Signaling (conditional) for use in network topologies that require
a different policy for the voice signaling than for the voice media.
guest_voice : Guest Voice to support a separate limited feature-set voice service
for guest users and visitors with their own IP Telephony handsets and
other similar appliances supporting interactive voice services.
guest_voice_signaling : Guest Voice Signaling (conditional) for use in network topologies that
require a different policy for the guest voice signaling than for the guest
voice media.
softphone_voice : Softphone Voice for use by softphone applications on typical data
centric devices, such as PCs or laptops. This class of endpoints frequently
does not support multiple VLANs, if at all,and are typically configured to
use an untagged VLAN or a single tagged data specific VLAN.
video_conferencing : Video Conferencing for use by dedicated Video Conferencing
equipment and other similar appliances supporting real-time interactive
video/audio services.
streaming_video : Streaming Video for use by broadcast or multicast based video
content distribution and other similar applications supporting streaming
video services that require specific network policy treatment. Video
applications relying on TCP with buffering would not be an intended use of
this application type.
video_signaling : Video Signaling (conditional) for use in network topologies that require
a separate policy for the video signaling than for the video media.
tagged : The device is using tagged frames
untagged : The device is using untagged frames
<vlan_id> : VLAN id
<l2_priority>: This field may specify one of eight priority levels (0 through 7), as defined by IEEE
802.1D-2004 [3].
<dscp> : This field shall contain the DSCP value to be used to provide Diffserv node
behavior for the specified application type as defined in IETF RFC 2474 [5]. This 6
bit field may contain one of 64 code point values (0 through 63). A value of 0
represents use of the default DSCP value as defined in RFC 2475.