Interlogix NS3502-8P-2S User Manual - Manual (Page 216)

IFS NS3502-8P-2S User Manual
216
Figure 4-10-3: ACE Configuration page screenshot
The page includes the following fields:
Object Description
• Ingress Port Select the ingress port for which this ACE applies.
Any: The ACE applies to any port.
Port n: The ACE applies to this port number, where n is the number of
the switch port.
Policy n: The ACE applies to this policy number, where n can range
from 1 through 8.
• Frame Type Select the frame type for this ACE. These frame types are mutually
exclusive.
Any: Any frame can match this ACE.
Ethernet Type: Only Ethernet Type frames can match this ACE. The
IEEE 802.3 describes the value of Length/Type Field specifications to
be greater than or equal to 1536 decimal (equal to 0600 hexadecimal).
ARP: Only ARP frames can match this ACE. Notice the ARP frames
won't match the ACE with ethernet type.
IPv4: Only IPv4 frames can match this ACE. Notice the IPv4 frames
won't match the ACE with ethernet type.
IPv6: Only IPv6 frames can match this ACE. Notice the IPv6 frames