Interlogix NS3502-8P-2S User Manual - Manual (Page 334)

IFS NS3502-8P-2S User Manual
334
4.16.6 LLDP PoE Neighbors
This page provides a status overview for all LLDP PoE neighbors. The displayed table contains a row for
each port on which an LLDP PoE neighbor is detected. The columns hold the following information: The
screen in Figure
4-16-6 appears.
Figure 4-16-6: LLDP PoE Neighbor screenshot
Please be noticed that administrator has to enable LLDP port from LLDP configuration, please refer to
following example (The screen in Figure
4-16-7 appears.) we enabled LLDP function from port1 to
port3, administrator has to plug a PD that supports PoE LLDP function, and then the administrator is
going to see the PoE information of the PD from the LLDP.
Figure 4-16-7: LLDP Configuration screenshot