Interlogix NS3502-8P-2S User Manual - Manual (Page 266)

IFS NS3502-8P-2S User Manual
266
well as a timeout.
• Other Info This section contains information about the state of the server and the
latest round-trip time.
Name RFC4670 Name Description
State - Shows the state of the server. It takes
one of the following values:
Disabled: The selected server is
disabled.
Not Ready: The server is enabled, but
IP communication is not yet up and
running.
Ready: The server is enabled, IP
communication is up and running and
the RADIUS module is ready to accept
accounting attempts.
Dead (X seconds left): Accounting
attempts were made to this server,
but it did not reply within the
configured timeout. The server has
temporarily been disabled, but will
get re-enabled when the dead-time
expires. The number of seconds left
before this occurs is displayed in
parentheses. This state is only
reachable when more than one
server is enabled.
Round-Tri
p Time radiusAccClientEx
tRoundTripTime The time interval (measured in
milliseconds) between the most
recent Response and the Request
that matched it from the RADIUS
accounting server. The granularity of
this measurement is 100 ms. A value
of 0 ms indicates that there hasn't
been round-trip communication with
the server yet.
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.