Interlogix NS3502-8P-2S User Manual User Manual

Page 85

Advertising
background image

IFS NS3502-8P-2S User Manual

85

SNMP v2c: Set SNMP trap supported version 2c.
SNMP v3: Set SNMP trap supported version 3.

•

Trap Community

Indicates the community access string when send SNMP trap
packet. The allowed string length is 0 to 255, and the allowed
content is the ASCII characters from 33 to 126.

•

Trap Destination
Address

Indicates the SNMP trap destination address.

• Trap Destination

IPv6 Address

Provide the trap destination IPv6 address of this switch. IPv6
address is in 128-bit records represented as eight fields of up to
four hexadecimal digits with a colon separate each field (:). For
example,

‘fae0::013:4fefe:dea4:34d4’

. The symbol '::' is a special

syntax that can be used as a shorthand way of representing
multiple 16-bit groups of contiguous zeros; but it can only appear
once. It also used a following legally IPv4 address. For example,
'::192.1.2.34'.

•

Trap
Authentication
Failure

Indicates the SNMP entity is permitted to generate
authentication failure traps. Possible modes are:
Enabled: Enable SNMP trap authentication failure.
Disabled: Disable SNMP trap authentication failure.

• Trap Link-up and

Link-down

Indicates the SNMP trap link-up and link-down mode operation.
Possible modes are:
Enabled: Enable SNMP trap link-up and link-down mode
operation.
Disabled: Disable SNMP trap link-up and link-down mode
operation.

• Trap Inform Mode

Indicates the SNMP trap inform mode operation. Possible modes
are:
Enabled: Enable SNMP trap inform mode operation.
Disabled: Disable SNMP trap inform mode operation.

• Trap Inform

Timeout (seconds)

Indicates the SNMP trap inform timeout. The allowed range is 0
to 2147.

• Trap Inform Retry

Times

Indicates the SNMP trap informs retry times. The allowed range is
0 to 255.


Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

Advertising