Philips STU801/05R - Manual (Page 12)

OPERATION I Programme Status
j
Pressing the CZ) key will display the programme ident, audio mode and audio
frequency of the programme you are viewing and also the receivers clock
(flashing if not set).
The TV/SAT Button
With some TV sets, it may be impossible to select a terrestrial TV programme
while the Receiver is switched on. This may happen when you have your
Receiver connected to your TV by means of an A/V connector cable.
If this occurs, you should press the TV/SAT button on your Remote Control
once. Now you can select and watch terrestrial TV programmes.
To return to satellite programmes, press the TV/SAT button once again.
If you have no problem changing TV channels while your Receiver is switched
on, you will not need to use the TV/SAT button.
Change The Sound Volume
If you have a Philips TV, you may be able to control the volume of the sound
with your Receiver remote control. This may not be possible with some older
Philips TV sets. With most other makes of TV sets, the volume button on your
Satellite Receiver Remote Control will have no effect.
Auxiliary Programme
Pressing the 0 key will select an auxiliary programme which is set up to work
with an external (MAC) Receiver connected to the DECODER/
DESCRAMBLER connector. It must be noted that this is in fact Programme
60 and changing the AV source setting for that programme will affect the
function of the 0 key.
On-Screen Display Menus
Certain functions of the Receiver are performed by use of On-Screen Display
menus (O.S.D) e.g. timer functions and modifying or adding new programmes.
Once in a menu, the MENU and O keys are used to move fon/vard and
backward through the parameters and the <□ and [>> keys are used to alter
parameters.
Direct entry using the numeric keys is also possible and shall be highlighted
as we go through the functions. If you want to cancel alterations in a menu,
press the VIEW key and this will remove the menu from your screen and
erase any changes.
Timer functions
The Receiver has a built-in timer facility which allows it to switch on and off at
selected times. The primary use of this is to record satellite events, in conjunc­
tion with a VCR, whilst the Receiver is unattended.
NoteJhe Receiver and VCR should have the same start and stop recording times.
Setting the Clock
Q
O
J
TV SAT
O
\7
o Press MENU followed by 4.
D> The 9 light on the Receiver will be flashing.
O Press or [j> to adjust the day. SO = SUNDAY
O Press MENU again. MO = MONDAY
O Press <□ or (3> to adjust the hour. Dl = TUESDAY
o Press MENU again. Ml = WEDNESDAY
o Press <Q or |2> to adjust the minutes. DO = THURSDAY
o Press STORE to store your settings.
FR = FRIDAY
You may also enter the hours and minutes using the numeric keys on your
SA = SATURDAY
remote control.
Note: You need to set the clock again after the Receiver has been disconnected from the mains
supply.
GB 10