To a tv and a vcr, using euroconnectors – Philips STU801/05R User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS ■ To a TV and a VCR, using Euroconnectors
C
I’-
2
.
3.
4.
5.
7.
8
.
9.
Make the connections as shown in the drawing.
Connect your Receiver to the mains socket.
Switch your TV ON.
Press button number 1 on your Receiver remote control.
Press MENU followed quickly by 1 on your remote control. The
9 light on your Receiver should now be blinking. Also your TV
should now show the Satellite Receiver picture or, at least, text
on the screen. If not, you may have to select the AA/ input on
your TV.
Switch the Receiver to standby using the (!) key on the remote
control. Play a video cassette in your VCR. If you do not see a
picture from the VCR, check the connections as below.
Switch your VCR off.
Press VIEW on your remote control.
Go to the section Connect Your Polariser or Aim your dish.
J
GB6