Philips STU801/05R - Manual (Page 5)

J
HOW TO CONNECT YOUR RECEIVER
Position your Philips STU 801 Satellite
Receiver
The STU 801 is intended for use in a domestic environment oniy and shouid
never be operated or stored in an excessively hot or humid atmosphere.
Choose a position at some distance away from radiators or other sources of
heat.
Leave a clear space of at least 3 cm all around the Receiver for ventilation.
Make sure that curtains, cupboards, etc. cannot obstruct air flow through the
ventilation openings.
Insert batteries In the remote control
CONNECTIONS
o
o
o
Remove the battery cover located on the
back of the remote control handset.
Insert two batteries (type LR03 1.5 V).
Replace the battery cover.
Connecting your satellite dish antenna
First, install the dish antenna and its receiving element - the Low Noise
Converter (LNC) - according to the manufacturer’s instructions.
Make sure your Satellite Receiver is not connected to the mains while
connecting the dish antenna to your Receiver.
Connect the satellite antenna cable to the connector marked on the back
of the Receiver, using the connector supplied with your Receiver.
Connecting your Receiver
This section tells you how to connect the Philips STU 801 Satellite Receiver to
the equipment you already have, such as a TV and Video Cassette Recorder
(VCR).
There are many connection options of which the most common are:
a. To a TV only, using a coaxial cable.
b. To a TV only, using a Euroconnector.
C. To a TV and a VCR, using Euroconnectors.
d. To a TV and a VCR using coaxial cables.
Option B is the best if you have a TV only because it gives the best picture
and sound quality. You will obtain even better sound if you connect the
Receiver to your hi-fi system. See Additional Connections section of this
manual.
Select one of the connection options, then follow the step-by-step instructions
on that page.
J
GB3