Cabletron Systems BRIM E100 BRIM-E100 - Manual (Page 17)

Chapter 2: Cabling Requirements
Page 2-4 BRIM-E100 User’s Guide
If you are installing this BRIM into a 100BASE-TX/FX environment with
repeaters, use the repeater instruction manual to determine maximum
cable lengths when laying out your network.
UTP Maximum Cable Lengths
An unshielded twisted pair copper segment in a 100BASE-TX
environment may be no more than 100 meters in length.
Multimode Fiber Cable Lengths
The maximum distance between two Data Terminal Equipment (DTE)
devices on a 100BASE-FX segment may be no more than 412 meters in
half duplex mode or 2 Kilometers (DTE to DTE) in full duplex mode.
book Page 4 Friday, April 19, 1996 9:53 AM