Cabletron Systems BRIM E100 BRIM-E100 - Manual (Page 20)

Installing Fast Ethernet Interface Modules
BRIM-E100 User’s Guide Page 3-3
4. Remove the two faceplate screws from the BRIM-E100. See
Figure 3-2.
5. Remove the faceplate.
Figure 3-2 Removing the Faceplate
!
C AUT IO N
Failure to remove the BRIM-E100 faceplate before installing
the Fast Ethernet Interface Module may result in damage to the
BRIM-E100 and/or the Fast Ethernet Interface Module.
1665_10
TX
RX BRIM-E100
book Page 3 Friday, April 19, 1996 9:53 AM