Cabletron Systems BRIM E100 BRIM-E100 - Manual (Page 41)

Appendix A: Fast Ethernet Interface Module Specifications
Page A-2 BRIM-E100 User’s Guide
A.1.2 FE-100FX
The FE-100FX shown in Figure A-2 supports multimode fiber optic
cabling. The FE-100FX is equipped with an SC style port. Specifications
for the FE-100FX are listed below.
Figure A-2 FE-100FX
The transmitter power levels and receive sensitivity levels listed are peak
power levels after optical overshoot. A peak power meter must be used to
correctly compare the values given above to those measured on any
particular port. If power levels are being measured with an average power
meter, add 3 dB to the measurement to compare the measured values to
the values listed above.
Table A-1 Transmitter Power
Cable Type Worst Case Budget Typical Budget
50/125
µ
m fiber 6.0 dB 9.0 dB
62.5/125
µ
m fiber 9.0 dB 12.0 dB
100/140
µ
m fiber 15.0 dB 18.0 dB
166508
BRIM-E100
FE-100 FX
RX
TX
book Page 2 Friday, April 19, 1996 9:53 AM