Cisco OL-15491-01 - Manual (Page 190)

A-190
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
meter exclude network-init sip
meter exclude network-init sip
To exclude incoming Session Initiation Protocol (SIP) transactions (that is, those that are initiated from
the network) from the CSG2 usage calculation, use the meter exclude network-init sip command in
CSG2 service configuration mode. To return to the default behavior, use the no form of the command.
meter exclude network-init sip
no meter exclude network-init sip
Syntax Description This command has no arguments or keywords.
Defaults The default behavior is to include incoming SIP transactions in the usage calculation.
Command Modes CSG2 service configuration
Command History
Examples The following example shows how to exclude incoming SIP transactions from the usage calculation for
the SERVICE-A service:
ip csg service SERVICE-A
meter exclude network-init sip
Related Commands
Release Modification
12.4(15)MD This command was introduced.
Command Description
ip csg service Configures a CSG2 content billing service, and enters CSG2 service
configuration mode.
meter exclude control sip Excludes call control packets for a Session Initiation Protocol (SIP)
session from the CSG2 usage calculation.
meter exclude mms wap Excludes bytes for a WAP 1.x Multimedia Messaging Service (MMS)
session from the CSG2 usage calculation.
meter exclude pause rtsp Excludes the Real Time Streaming Protocol (RTSP) PAUSE time from
the CSG2 usage calculation.
meter exclude svc-idle Excludes the final service idle from the CSG2 usage calculation.
meter include imap Specifies which Internet Message Access Protocol (IMAP) bytes are
billed for by the CSG2 when doing prepaid debits.
meter increment Specifies the increments for debiting quota by the CSG2 upon
completion of a service configured for Service Duration Billing.