Cisco OL-15491-01 - Manual (Page 216)

A-216
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
pending
pending
To set the pending connection timeout, use the pending command in CSG2 content configuration mode.
To restore the default, use the no form of this command.
pending timeout
no pending
Syntax Description
Defaults The default pending connection timeout is 30 seconds.
Command Modes CSG2 content configuration
Command History
Examples This example shows how to set the pending connection timer for a CSG2 content:
ip csg content MOVIES_COMEDY
pending 300
Related Commands
timeout Time, in seconds, to wait for a response to an initial synchronization sequence
number (SYN) on a TCP session. The range is from 4 to 65535. The default value
is 30.
Release Modification
12.4(11)MD This command was migrated from CSG1.
Changes from CSG1: None.
Command Description
idle (CSG2 content) Specifies the minimum amount of time that the CSG2 maintains an
idle content connection.
ip csg content Configures content for CSG2 services, and enters CSG2 content
configuration mode.
show ip csg Displays information about the CSG2.