Cisco OL-15491-01 - Manual (Page 61)

A-61
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg content
ip csg content
To configure content for CSG2 services, and to enter CSG2 content configuration mode, use the ip csg
content command in global configuration mode. To delete the content configuration, use the no form of
this command.
ip csg content content-name
no ip csg content content-name
Syntax Description
Defaults None
Command Modes Global configuration
Command History
Usage Guidelines You can define up to 2048 contents.
The characteristics of each content configuration are defined by the following commands:
• block
• client-group (CSG2 content)
• idle (CSG2 content)
• inservice (CSG2 content)
• ip (CSG2 content)
• mode tcp
• next-hop
• parse length
• parse protocol
• pending
• policy (CSG2 content)
• records delay
• records intermediate
• replicate
content-name Name of the content. The name can be from 1 to 15 characters long, and can
include uppercase or lowercase letters (the CSG2 changes all letters to
uppercase), numbers, and any special characters.
Release Modification
12.4(11)MD This command was migrated from CSG1.
Changes from CSG1: None.