Cisco OL-15491-01 - Manual (Page 41)

A-41
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
inservice (CSG2 content)
inservice (CSG2 content)
To activate the content service on each CSG2, use the inservice command in CSG2 content configuration
mode. To suspend the content service, use the no form of this command.
inservice
no inservice
Syntax Description This command has no arguments or keywords.
Defaults The default value is no inservice.
Command Modes CSG2 content configuration
Command History
Usage Guidelines When you activate the inservice command, the CSG2 verifies the parameters semantically. If the CSG2
detects an error, the command fails.
If there are sessions on a content, and you take the content out of service (with the no inservice
command), the CSG2 does not allow the content to be placed back in service (with the inservice
command) until the sessions have been cleaned up. If you try to enter the inservice command before the
CSG2 has cleaned up the sessions, the command fails.
Examples The following example shows how to place the CSG2 content MOVIES_COMEDY in service:
ip csg content MOVIES_COMEDY
inservice
Related Commands
Release Modification
12.4(11)MD This command was migrated from CSG1.
Changes from CSG1: None.
Command Description
ip csg content Configures content for CSG2 services, and enters CSG2 content
configuration mode.