Cisco OL-15491-01 - Manual (Page 266)

A-266
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
vlan (CSG2 content)
vlan (CSG2 content)
To restrict the CSG2 billing content to a single source VLAN, use the vlan command in CSG2 content
configuration mode. To remove the restriction, use the no form of this command.
vlan vlan-number
no vlan
Syntax Description
Defaults None
Command Modes CSG2 content configuration
Command History
Usage Guidelines The VLAN number is dependent on the CSG2 card that receives the content. When the content is
downloaded to a CSG2 card, the vlan-number argument is mapped to a specific VLAN number.
Examples The following example shows how to restrict the CSG2 content billing to single-source VLAN number
67:
ip csg content MOVIES_COMEDY
vlan 67
Related Commands
vlan-number Dot1q encapsulation VLAN number.
Release Modification
12.4(11)MD This command was migrated from CSG1.
Changes from CSG1: The vlan-name argument was replaced with the vlan-number
argument.
Command Description
ip csg content Configures content for CSG2 services, and enters CSG2 content
configuration mode.