Juniper Systems XF101 - Manual

Technical Details:
The following information is provided for
users familiar with Hemisphere GPS
commands. For more information on specifi c
commands, please consult the Hemisphere
GPS Technical Reference. This document can
be downloaded at www.hemispheregps.com.
The following confi guration commands are
sent at the factory:
$JOFF •
$JWAASUDRE,13,13 •
$JMODE,SBASR,YES •
$JMASK,3 •
$JALT,SATS,4 •
$JASC,GPGGA,1,PORTA •
$JASC,GPGSA,1,PORTA •
$JASC,GPGSV,.2,PORTA •
$JASC,GPVTG,1,PORTA •
$JBAUD,57600,PORTA,SAVE •
Contact Information:
[email protected]
Factory Settings:
The XF101 is confi gurable. The following set-
tings are the standard factory confi gurations.
These are the settings that Hemisphere GPS
recommends using.
Port to access GPS COM2
Default baud rate 57600
Messages GPGGA (1 Hz)
GPGSA (1 Hz)
GPVTG (1 Hz)
GPGSV (5 sec.)
Indicator:
The LED on the top left corner is red when the
GPS has power.
© Hemisphere GPS (2009). All rights reserved.
Hemisphere GPS ® , and the Hemisphere GPS logo are propi-
etary trademarks of Hemisphere GPS. Other trademarks are
the properties of their respective owners.
XF101 DGPS Reveiver
Quick Reference Guide
Part Number 875-0234-000 Rev. A1
Add a new GPS receiver to a Windows ®
Mobile PC with a XF101 DGPS receiver.