Canon ImageCLASS MF8050Cn - Manual (Page 107)

6-23
U
sing the F
ax F
unc
tions
How to display the settings
[ ]
→ <Send/Receive Settings> → <Fax Settings> → <Send
Settings> → <ECM Sending>
Settings
(Boldface: Default settings)
Off Does not use the ECM function.
On Uses the ECM function.
Pause Time
Specify the number of seconds for a pause when [ ] (Pause)
is pressed.
For deatails on adding pauses, see "Sending a Fax Abroad
(Adding Pauses)" (
→P.6-8)
How to display the settings
[ ]
→ <Send/Receive Settings> → <Fax Settings> → <Send
Settings> → <Pause Time>
Settings
(Boldface: Default settings)
1 to 2 to 15 (seconds)
Auto Redial
Automatic redialing enables the machine to automatically
redial the recipient's fax number if the recipient cannot be
reached due to a busy line, or if a sending error occurs.
You can set the number of times and the intervals for redialing.
How to display the settings
[ ]
→ <Send/Receive Settings> → <Fax Settings> → <Send
Settings>
→ <Auto Redial>
Settings
(Boldface: Default settings)
Off
Does not redial automatically.
When redialing manually, see "Redialing
(Manual Redialing)" (
→P.6-6) .
On
Redial Times:
1 to
2 to15 (times)
Specifi es the number of times for
redialing.
Redial Interval:
2 to 99 (minutes)
Specifi es the interval for redialing.
Redial If Error Occurs:
Off ,
On
Specifi es whether or not to redial when a
sending error occurs.
Check Dial Tone Before Sending
When sending a fax, you can specify whether or not to dial
after checking the dial tone.
How to display the settings
[ ] → <Send/Receive Settings> → <Fax Settings> → <Send
Settings>
→ <Check Dial Tone Before Sending>
Settings
(Boldface: Default settings)
Off Does not check the dial tone.
On Dials after checking the dial tone.
Setting Procedure for Receiving
Specify the settings for receiving using the following procedure.
This section describes the procedure for changing the setting
for "ECM Receiving" as an example.
OK
Menu
Keys to be used for this operation
1
Press [ ] (Menu).
2
Select <Send/Receive Settings> with [ ] or [ ],
and then press [OK].
Menu
Common Settings
Copy Settings
Memory Media Settin
Send/Receive Setting
...
3
Select <Fax Settings> with [ ] or [ ], and then
press [OK].
Send/Receive Settings
Common Settings
Fax Settings
4
Select <Receive Settings> with [ ] or [ ], and
then press [OK].
Fax Settings
Basic Settings
Send Settings
Receive Settings
Fax Setup Guide
5
Select <ECM Receiving> with [ ] or [ ], and
then press [OK].
Receive Settings
ECM Receiving
Incoming Ring
Remote Receiving
Manual/Auto Switch