Canon ImageCLASS MF8050Cn - Manual (Page 152)

10-6
Regist
ering/S
etting the
V
arious F
unc
tions
P.6-26
P.6-26
P.6-27
P.6-27
P.6-27
P.6-27
P.6-26
P.6-26
Continues from the previous page
Continues to the upper right
Use HTTP
On
Off
SNMP Settings
Enable Dedicated Port
On
Off
On
Off
On
Off
0 to 515 to 65535 LPD
0 to 9100 to 65535 RAW
0 to 80 to 65535 HTTP
0 to 161 to 65535 SNMP
public Community Name 1
(None) Community Name 2
Writable SNMP 1/Writable SNMP 2
Read-Write (RW)
Read-Only (RO)
Off Dedicated Community Settings
Printer Management Infomation from Host
On
Off
Startup Settings 0 to 300 (Seconds)
Port Number Settings
Continues from the lower left
UFRII LT
UFRII LT(XPS)
FAX Network
UFRII LT(XPS)
UFRII LT USB
On
Off Restrict Sending from History
On
Off Fax No. Confirmation Re-Entry
Confirm Sequential Broadcast
Reject Sequential Broadcast
Off Restrict Sequential Broadcast
On
Off Allow Driver Faxing
On
Off Display Job History
CD-ROM
On
Off USB Device On/Off
CD-ROM
On
Off Memory Media Storage On/Off CD-ROM
Select PDL (Plug-n-Play) CD-ROM
Auto Detect
MAC Address
On
Ethernet Driver Settings
Fax Settings
Communications Settings
33600 bps
14400 bps
9600 bps
7200 bps
4800 bps
2400 bps
Send Start Speed
Receive Start Speed
Device Information
Dept. ID Management
Network Settings
Communications Settings
Forwarding Settings
Store/Print When Forwarding
Remote UI On/Off
Restrict Sending
Display Job History
USB Device On/Off
Memory Media Storage On/Off
Select PDL (Plug-n-Play)
Initialize All
System Manager Information
Update the Firmware
Initialize Address Book
Initialize System Settings
CD-ROM
CD-ROM
CD-ROM
TX Image Report Off
On
Print Reports Lists
Off
On
For Errors Only
Send Results
Coded Dial
One-Touch
Group
Address Book List
Off
On
For Errors Only
Receive Report
User Data
Fax Activity Report
Transmission Management
Reports Settings CD-ROM
CD-ROM
Auto Print After 40 Transmissions Off
On
Separate Send/Receive Off
On
On
Off
On
Off
Memory Lock Settings
Canada (CA)
United States (US)
Mexico (MX)
Other
Brazil (BR)
Select Country/Region
Memory Lock PIN
Print Report
Do Not Set Memory Lock Time
Set
- Memory Lock Start Time
- Memory Lock End Time
Off
- Communication Mode:
Half Duplex, Full Duplex
- Ethernet Type:
10 Base-T, 100 Base-TX
Reports
1
2
<How to display>
Press [Report].
The report output menu is displayed.
2
1
P.6-27
P.6-27
Address Book PIN
On
Off Restrict New Destinations
Restrict Sending
On
Off Forwarding Settings
On
Off Remote UI On/Off CD-ROM
Store/Print When Forwarding CD-ROM
On
For Errors Only
Off Print Images
For Errors Only
Do Not Store Store Images in Memory
LPD Settings
Off Use WSD Settings
On
Off
RAW Settings
On
On
Off Use WSD Browsing
On
Off Use Multicast Discovery
On
Off
WSD Settings
P.6-14