Canon ImageCLASS MF8050Cn - Manual (Page 64)

3-8
C
op
ying
The default values of the copy are the function which is applied
when [
] (Reset) is pressed or the power is turned ON. You
can change the default values to suit your needs.
You can register the following types of settings as the default
values.
Quantity
Density
Original type
2-Sided
Copy ratio
Paper
N on 1
Collating
Frame erase
Sharpness
OK
Menu
Keys to be used for this operation
1
Press [ ] (Menu).
2
Select <Copy Settings> with [ ] or [ ], and then
press [OK].
Menu
Sound Volume Control
Common Settings
Copy Settings
Memory Media Settin...
3
Make sure that <Change Defaults> is selected,
and then press [OK].
Copy Settings
Change Defaults
•
•
•
•
•
•
•
•
•
•
4
Select a setting item with [ ] or [ ], and then
press [OK].
Change Defaults
<Apply>
No. of Copies: 1
Density: 0
Original Type: Text... +-
For details on the settings, see the following items.
"Selecting Copy Papers" (
→P.3-3)
"Adjusting the Density" ( →P.3-3)
"Selecting Image Quality (Copy)" (
→P.3-4)
"2-Sided Copying (MF8350Cdn Only)" ( →P.3-4)
"Enlarging/Reducing Copies" ( →P.3-5)
"Multiple Documents onto One Sheet (N on 1)" (
→P.3-5)
"Collating Copies" ( →P.3-6)
"Erase Dark Borders and Frame Lines (Frame Erase)" ( →P.3-6)
"Emphasize the Outline of an Image (Sharpness)" (
→P.3-6)
5
After specifying the settings, select <Apply> with
[
] or [ ], and then press [OK].
Change Defaults
<Apply>
No. of Copies: 1
Density: 0
Original Type: Text...
+-
6
Press [ ] (Menu) to close the menu screen.
Ch anging the Default Values