Canon ImageCLASS MF8050Cn - Manual (Page 95)

6-11
U
sing the F
ax F
unc
tions
The above settings between *2 and *4 can be specified in
"Detailed Settings for the Fax/Tel Mode" on P. 6-13.
*1 You can change the number of times the incoming call
rings in "Incoming Ring" on P. 6-25.
*2 You can set the time taken to judge in <Ring Start
Time>.
*3 You can change the ringing time in <Incoming Ring
Time>.
*4 Specify which operation is performed in <After Ring>.
Operation for when an incoming call is received
An incoming call rings for the specified number of times.*1
When you do not pick up the handset
within the specified number of times
When you pick up the handset within
the specified number of times
When the call is a fax When the call
is a voice call
You can hear a
beep.Following the
procedure below, receive the
fax.
(1) Press [Fax].
(2) Select <Start Receiving>
with [ ] or [ ], and then
press [OK].
(3) Hang up the handset.
You can start
talking as is.
The machine judges whether the
incoming call is a fax or voice call.*2
When the call is
a fax
When the call is
a voice call
The machine receives
the fax automatically.
The telephone rings.*3
When you pick up the
handset during ringing
When you do not pick up
the handset during ringing
You can start talking as is. The machine hangs up the
telephone or switches to the fax
receive mode.*4
Receives a fax automatically. (An incoming call rings. To configure so that the incoming call does not ring,
see "Incoming Ring" (
→P.6-25))
Respond to a telephone call by picking up the handset.
Fax/Tel mode
The telephone rings the number of times specified for the built-in
answering machine.*1
When you pick up the handset during
ringing
When the built-in answering machine
starts up
When the call is a fax When the call is a
voice call
The built-in answering
machine records the
message.*2 You can start talking as
is.
When the call is a
voice call When the call is a fax
The machine receives the
fax automatically. You can hear a beep.
Following the procedure
below, receive the fax.
(1) Press [Fax].
(2) Select <Start Receiving>
with [ ] or [ ], and then
press [OK].
(3) Hang up the handset.
Answer mode
Receives a fax automatically.
The answering machine records a message for telephone calls.
* 1 Set your answering machine to answer after a few rings.
* 2 Record a message on your answering machine.
(It is recommend that you insert about 4 seconds of silence at the
beginning of the message or limit the message within 20 seconds.)
Operation for when an incoming call is received