Canon ImageCLASS MF8050Cn - Manual (Page 88)

6-4
U
sing the F
ax F
unc
tions
Specifying Destinations
Specifying Destinations by Entering a Fax Number
Specify the fax number with the numeric keys, [ ] (Tone), and [ ] (Symbols).
Correcting destinations
Canceling destinations
Press and hold [ ] (Clear).
Deleting the last character of a destination
Press [ ] (Clear).
•
•
Specifying Destinations Using Coded Dial
Press [ ] (Coded Dial), and then enter the three-digit registration number (001 to
181) with the numeric keys.
To use this feature, you need to register destinations in coded dials beforehand.
"Storing/Editing Coded Dial Codes" ( →P.5-6)
If incorrect keys are pressed
After pressing [ ] (Reset), repeat the procedure from specifying the settings for the document scanning.
Specifying Destinations Using the One-Touch Keys
Press the one-touch key (01 to 19) of the destination.
To use this feature, you need to register destinations in one-touch keys beforehand.
"Storing/Editing One-Touch Keys" ( →P.5-3)
If incorrect keys are pressed
After pressing [ ] (Reset), repeat the procedure from specifying the settings for the document scanning.
Specify ing Destinations