Sync and clock settings, Lfo x waveshape, Lfo x midi sync – Kenton Pro-2000 mk1 User Manual

Page 13: Sync clock divide, 1 to 9 as below, default: triangle[1]), Off, 1 to 96, default: off)

Advertising
background image

12

LFO x WAVESHAPE #

(1 to 9 as below, default: triangle[1])

- sets the wave shape for the LFO

1, Triangle

2, Sawtooth up

3, Sawtooth down

4, Square

5, PulseWidth 10%

6, PulseWidth 20%

7,1 PulseWidth 30%

8, PulseWidth 40%

9, Sample + Hold
(random depth)

LFO x MIDI SYNC

(off, 1 to 96, default: off)

- allows the LFO waveform to be synchronised to MIDI clock, with a variable divide ratio. If MIDI sync
is selected and is in operation, the 2000 will automatically recalcul;ate the LFO speed in order to fit a
whole LFO waveform between MIDI clocks (or multiples of clocks depending on the setting of sync
divide. (See below for divide ratios).

If set to 1, there will be 1 cycle of the LFO for every 1 MIDI clock. (i.e. 24 cycles per quarter note)
If set to 24, there will be 1 cycle of the LFO for every 24 MIDI clocks. (i.e. 1 cycle of the LFO per
quarter note)

Note; MIDI sends 24 clocks per quarter note.

Below is a table of values you can set the divide ratio to to obtain LFO cycles of various musical
lengths:

Note type;

Divide ratio;

Semibreve

96

Minim

48

Crotchets

24

Crotchet triplets

16

Quavers

12

Quaver triplets

8

Semiquavers

6

Semiquaver triplets

4

Demisemiquavers

3

Demisemiquaver triplets

2

SYNC and CLOCK SETTINGS

SYNC Clock Divide

(1/2 &1 to 24, default: 2)

- sets the ratio of MIDI clocks to output pulses from the clock pulse output.
Note that cpqn = clocks per quarter note and that the MIDI clock rate is always 24 cpqn

If set to _ = 48 cpqn - there will be 2 pulses from the clock pulse output for every 1 MIDI clock
If set to 1 - there will be 1 pulse from the clock pulse output for every 1 MIDI clock (24 cpqn)
If set to 24 - there will be 1 pulse from the clock pulse output for every 24 MIDI clocks (1 cpqn)

Advertising