Specifications – Kenton Pro-2000 mk1 User Manual
Page 22
21
SPECIFICATIONS
Power;
230v AC 50Hz (170v - 260v) or 115v AC 50/60Hz (85v - 130v) - See note below.
6 Watts
Dimensions;
280mm x 132mm x 42mm
Weight;
2.5Kg
CONNECTIONS
Inputs;
Power Socket
(3 pin IEC)
MIDI In
(5 pin 180 degree DIN type)
4 push buttons
Outputs;
MIDI Out, Thru
(5 pin 180 degree DIN type)
Sync24
(5 pin 180 degree DIN type)
Clock Pulse
(3.5mm mono minijack)
6 Auxiliaries
(3.5mm mono minijack)
2 Control Voltage outputs
(3.5mm mono minijack)
2 Gate outputs
(3.5mm mono minijack)
Expansion port - optional
(15 pin High Density D or 8 pin Mini Din)
LCD 2x16 backlit
5 LED indicators
Accessories;
Operating Manual, Power cable
Optional Accessories;DCB port with cable (either 14 pin IEEE or 20 pin bump polarised)
KADI/WASP port with cable (either KADI or WASP cable)
Pair of ears for rack mounting
Note
The Kenton Electronics PRO-2000 MIDI-CV converter has a built in mains transformer factory set to 230 volts AC 50Hz unless otherwise
marked. The transformer has a switch for 115 volts AC. Ensure that this adjustment is made by competent service personnel only.
Warranty
The PRO-2000 comes with a 12 month (from purchase date) back-to-base warranty, (i.e. customer must arrange and pay for carriage to
and from Kenton Electronics).
Brookfarm House, Station Road, South Wimbledon, London, SW19 2LP, UK
Tel: +44 (0)20 8544 9200 Fax: +44 (0)20 8544 9300
e-mail: [email protected] web: www.kenton.co.uk
version 4305_330 e. & o. e.
18
TH
January 2003