Keri Systems Doors NetXtreme - Manual (Page 24)

Doors NetXtreme TM Reference Manual Keri Systems, Inc.
Page 22 01945-100 Rev. 4.0
7.0 Setup System Timezones & Holidays
Figure 19: Setup Timezones
7.1 System Timezones
Click on Setup > Timezones and Holidays > Timezones (tab).
There are two predefined timezones: Always and Never. These timezones are not editable. The Always
timezone always allows access regardless of time-of-day or day-of-the-week. The Never timezone
never allows access regardless of time-of-day or day-of-the-week.
1. Click .
2. Rename the Timezone to something that will make it easy to understand what is included in that
particular timezone.
3. From the drop-down menu select “Always,” “Never,” or “Use Times” for each day of the week
(and up to 6 holidays).
4. Enter the start time for each day of the week (and up to 6 holidays).
5. Enter the stop time for each day of the week (and up to 6 holidays).
NOTE: Time selections may be made by typing in the time (using a 24-hour clock format), or by right-
clicking in the field and selecting “Pick Time” then selecting the desired time from the list.
Makes a copy of an existing timezone and renames it adding “-copy” to the duplicated
name.
Removes the highlighted timezone.
NOTE: At this time it is possible to delete settings that are currently in use elsewhere in the software.
Doing this will cause the program to not function properly. It is recommended that instead of deleting
any settings, change the name to “UNUSED.” This will be changed in subsequent versions to not allow
deletions of functions that are in use elsewhere in the software.