Keri Systems Doors NetXtreme - Manual (Page 55)

Keri Systems, Inc. Doors NetXtreme TM Reference Manual
01945-100 Rev. 4.0 Page 53
18.0 Monitor
Figure 50: View Filters
18.1 Setup Monitor View Filters
Click on Setup > View Filters and Event Messages > View Filters (tab).
1. Click “Add New” or “Duplicate.”
2. Rename the view filter. Be sure to choose a name that will make it easy to identify.
3. Select the filter level.
4. Select the poll time (1-60 seconds).
5. Use the Message Type and Message Text columns to determine which messages should be
displayed in the monitor view.
6. Click on the green check mark button to deselect any messages that should NOT be displayed
(default is set for all messages to display).
7. From the drop-down menu, select the site(s) that should be included (default is for all sites to be
included).
8. Click to save the view filter as set up or to clear it without saving.