Kurgo Back Seat Barrier - Manual (Page 2)

Fixed Headrests
1. Pull top headrest strap
(D) out of its buckle (E). 2. Wrap strap (D) around the headrest. Insert strap
through the large D-ring (A) attached to the inner elastic
strap. Bring the strap back around the headrest and
run through (E). Repeat on opposite headrest.
CONTINUE FROM STEP TWO
OF THE DETACHABLE
HEADREST INSTRUCTIONS
Washing instructions
• Brush off loose dirt with a dry brush.
• As needed, wipe off with a damp sponge and mild soap.
• Rinse only, if possible. Use cold water and a sponge or rinse in a tub without soap.
• Machine wash in front-loading unit (DO NOT use machine with agitator, agitator could cause damage not
covered under warranty) Remove metal bars before washing. Use cold water and mild soap (Ivory Flakes,
Woolite, Sport Wash, Etc.) no t detergents.
• Rinse thoroughly to eliminate soap residue.
• Lay flat to dry.
7.14
For more information: 877.847.3868 :: www.kurgo.com :: [email protected]
Passenger Seat
Center Console
View from backseat
INSTALLED VIEW
Cup Holder
Pockets
TRAINING:
1) Get your dog familiar with riding in the car, focusing
on the back seats and not the front. Before setting out
on a long road trip with this new product, take some
shorter trips to help Fido become adjusted to the barrier.
2) Most importantly, the understanding of basic
obedience really makes the difference for any car ride.
Make sure your pup has a grasp of sit, stay and come to
help create easy going excursions.
Parts List & Key:
NOTE: The horizontal steel
support rod (H) is stored in
the vertical support rod
pocket (J) for packaging.
Please locate and insert
into the horizontal support
rod pocket (I)
A inner D-ring
B outer D-ring
C under seat hook
D top headrest strap
E top tension buckle
F under seat strap
G steel support velcro closure
H horizontal steel support rod
I steel support rod pocket
J vertical steel support bar pocket