LAARS LLS-1 - Instruction Manual - Manual (Page 13)

Laars Logic System Page 13
TEST VOLTAGE __ V
For factory information only.
Display #14 - Operating Summary
If this menu is selected the following display
will appear.
OPERATING SUMMARY
Use the arrow keys to scroll through the
information, it will appear as follows:
INSTALLED HRS ____
This displays the total number of hours the units
has been installed.
OPERATING ____
This displays the total number of hours the unit
has fired.
TOTAL CYCLES ____
The displays the total number of times the unit
has cycled on/off since it was first installed
This information cannot be changed. The
readout will go back to Display #1 if left inactive on
any display for longer than thirty (30) seconds.
SECTION 7.
Troubleshooting
The LLS controller, itself, cannot be
troubleshot. If the fault guides, which follow, lead
you to a faulty controller, replace the controller.
OUT OF
PRODUCTION