LABEC AA-12S - Manual (Page 10)

SEA Series Steam Sterilizers
Operation manual 6
7
D R Y k e y
This key selects the Fast sterilization cycle. With unwrapped instruments, you may use the
fast cycle by pressing the DRY key once, the indication light goes on and it indicates that
machine is in fast cycle mode. Using autoclave made by Runyes, you may still use this
selection to shorten the cycle time.
8 STEP key
This is a post cycle selection key. When a sterilize cycle completes, you may press this key
to keep on working or stop working The indication light goes on, and it means that when the
cycle is complete, the heating element will stop before the chamber door is opened. When
the indication light is off, it means that the chamber will be kept warm after completing a
cycle and heating up time is shorter during next cycle. If you don’t want to start the last
cycle, you need to press STEP key once.Then the indication light will be off.
When you choose the right program, push this button then it starts a cycle. Keeping pressing
the key 3seconds before desiccation phase, the cycle of sterilization will be quitted. Then it
will enter 3 minutes dryness. In this program if you press the key again, the program
of dryness will be over at any moment. If you press the key at the end of dryness, the cycle
will be quitted directly.
When the water volume is low, the light is glinting.
When the light goes on, the machines gets ready for sterilization,and the operator can press
start key to start a cycle.
Working light. It means sterilize program is working .
9 START/STOP key
10 WATER indication light
11 READY indication light
12 RUNNING indication light