LABEC AA-12S - Manual (Page 7)

SEA Series Steam Sterilizers
Operation manual 3
3.Installation
The Autoclave should be installed in a drafty place allowing minimum 10 cm space at all
sides and 20 cm at the top. The radiation openings at the side of the machine should not be
blocked. The Autoclave should be placed on a leveled counter top.(Fig 3-1)
If the front of the machine is lower than the back the control will display E3 (E3
means it does not dry completely) There fore, you may be possible to adjust the height
by adjusting foot pad of the frout of Autoclave.
And you can adjust the balance according to the Horizon.
3
6
9
439
Fig 3-1
575
Fig 3-2
Caution: